✨ New Arrivals Just Dropped!Explore
Fender Quadra Tap / Ultra Noiseless HSS Pre-Wired Stratocaster Pickguard, Parchment
HomeStore

Fender Quadra Tap / Ultra Noiseless HSS Pre-Wired Stratocaster Pickguard, Parchment

Fender Quadra Tap / Ultra Noiseless HSS Pre-Wired Stratocaster Pickguard, Parchment

Transform the voice of your Stratocaster® with a genuine Fender Pre-Wired Pickguard Assembly. Crafted with premium components in the same factory as our iconic guitars, this complete drop-in solution delivers authentic Fender® tone with hassle-free installation. No complicated wiring required - just remove your existing pickguard, connect two wires, mount the new assembly, and unlock a whole new voice for your guitar in minutes. It's the fastest way to upgrade your Strat® with our time-tested electronics and craftsmanship.

Equipped with the Quadra Tap™ 1 Humbucker and 70th Anniversary Ultra Noiseless™ Strat® pickups this loaded pickguard delivers an incredibly versatile range of HSS tones. The Ultra Noiseless single-coil pickups offer pristine vintage Fender tones without hum. In conjunction with the four distinct voices of the Quadra Tap™ 1 humbucker, this calibrated set is supremely versatile and offers dynamic Fender tone that is second to none. The volume knob’s S-1™ switch splits the Quadra Tap™ humbucker into a powerful single-coil, while the S-1™ switch on tone 1 knob activates the hot voicing in both humbucking and split modes. In addition, a treble bleed circuit maintains your highs at any volume.

Powered by an alnico 2 bar magnet, the passive Quadra Tap™ Humbucker is a tone-shaping powerhouse. Experience four distinct voices that span from vintage-inspired warmth to scorching hot output in both single coil and humbucker settings.

Features:

  • Quadra Tap™ 1 Humbucker in the bridge position and 70th Anniversary Ultra Noiseless™ Strat® pickups in the neck and middle positions
  • S-1™ switch on volume knob splits the Quadra Tap™ humbucker into a powerful single-coil
  • S-1™ switch on tone 1 knob activates the hot voicing in both humbucking and split modes
  • All passive designs that are noise-free
  • The fastest way to upgrade your Strat® with our time-tested electronics and craftsmanship

Specifications:

  • Pickguard: 3-Ply Parchment, 11-Hole Modern
  • Bridge Pickup: Quadra Tap™ 1 Humbucker
  • Middle Pickup: 70th Anniversary Ultra Noiseless™ Strat®
  • Neck Pickup: 70th Anniversary Ultra Noiseless™ Strat®
  • Lead Wire: Vinyl-covered
  • Magnet Type: Alnico 2
  • Magnet Wire: Enamel-coated
  • Shielded: Yes
  • Bobbin Material: Plastic
  • Controls: Master Volume (with S-1™ Switch), Tone 1. (with S-1™ Switch, Neck/Middle Pickups), Tone 2. (Bridge Pickup)
  • Switching: 5-Position Blade - Position 1. Bridge Pickup, Position 2. Bridge and Middle Pickup, Position 3. Middle Pickup, Position 4. Middle and Neck Pickup, Position 5. Neck Pickup
  • Output: Vintage and Hot
  • Power: Passive
  • Potentiometers: S-1™ 500K Master Volume, S-1™ 250K Tone 1, 500K Tone 2


$216.37

Original: $618.21

-65%
Fender Quadra Tap / Ultra Noiseless HSS Pre-Wired Stratocaster Pickguard, Parchment

$618.21

$216.37

Fender Quadra Tap / Ultra Noiseless HSS Pre-Wired Stratocaster Pickguard, Parchment

Transform the voice of your Stratocaster® with a genuine Fender Pre-Wired Pickguard Assembly. Crafted with premium components in the same factory as our iconic guitars, this complete drop-in solution delivers authentic Fender® tone with hassle-free installation. No complicated wiring required - just remove your existing pickguard, connect two wires, mount the new assembly, and unlock a whole new voice for your guitar in minutes. It's the fastest way to upgrade your Strat® with our time-tested electronics and craftsmanship.

Equipped with the Quadra Tap™ 1 Humbucker and 70th Anniversary Ultra Noiseless™ Strat® pickups this loaded pickguard delivers an incredibly versatile range of HSS tones. The Ultra Noiseless single-coil pickups offer pristine vintage Fender tones without hum. In conjunction with the four distinct voices of the Quadra Tap™ 1 humbucker, this calibrated set is supremely versatile and offers dynamic Fender tone that is second to none. The volume knob’s S-1™ switch splits the Quadra Tap™ humbucker into a powerful single-coil, while the S-1™ switch on tone 1 knob activates the hot voicing in both humbucking and split modes. In addition, a treble bleed circuit maintains your highs at any volume.

Powered by an alnico 2 bar magnet, the passive Quadra Tap™ Humbucker is a tone-shaping powerhouse. Experience four distinct voices that span from vintage-inspired warmth to scorching hot output in both single coil and humbucker settings.

Features:

  • Quadra Tap™ 1 Humbucker in the bridge position and 70th Anniversary Ultra Noiseless™ Strat® pickups in the neck and middle positions
  • S-1™ switch on volume knob splits the Quadra Tap™ humbucker into a powerful single-coil
  • S-1™ switch on tone 1 knob activates the hot voicing in both humbucking and split modes
  • All passive designs that are noise-free
  • The fastest way to upgrade your Strat® with our time-tested electronics and craftsmanship

Specifications:

  • Pickguard: 3-Ply Parchment, 11-Hole Modern
  • Bridge Pickup: Quadra Tap™ 1 Humbucker
  • Middle Pickup: 70th Anniversary Ultra Noiseless™ Strat®
  • Neck Pickup: 70th Anniversary Ultra Noiseless™ Strat®
  • Lead Wire: Vinyl-covered
  • Magnet Type: Alnico 2
  • Magnet Wire: Enamel-coated
  • Shielded: Yes
  • Bobbin Material: Plastic
  • Controls: Master Volume (with S-1™ Switch), Tone 1. (with S-1™ Switch, Neck/Middle Pickups), Tone 2. (Bridge Pickup)
  • Switching: 5-Position Blade - Position 1. Bridge Pickup, Position 2. Bridge and Middle Pickup, Position 3. Middle Pickup, Position 4. Middle and Neck Pickup, Position 5. Neck Pickup
  • Output: Vintage and Hot
  • Power: Passive
  • Potentiometers: S-1™ 500K Master Volume, S-1™ 250K Tone 1, 500K Tone 2


Product Information

Shipping & Returns

Description

Transform the voice of your Stratocaster® with a genuine Fender Pre-Wired Pickguard Assembly. Crafted with premium components in the same factory as our iconic guitars, this complete drop-in solution delivers authentic Fender® tone with hassle-free installation. No complicated wiring required - just remove your existing pickguard, connect two wires, mount the new assembly, and unlock a whole new voice for your guitar in minutes. It's the fastest way to upgrade your Strat® with our time-tested electronics and craftsmanship.

Equipped with the Quadra Tap™ 1 Humbucker and 70th Anniversary Ultra Noiseless™ Strat® pickups this loaded pickguard delivers an incredibly versatile range of HSS tones. The Ultra Noiseless single-coil pickups offer pristine vintage Fender tones without hum. In conjunction with the four distinct voices of the Quadra Tap™ 1 humbucker, this calibrated set is supremely versatile and offers dynamic Fender tone that is second to none. The volume knob’s S-1™ switch splits the Quadra Tap™ humbucker into a powerful single-coil, while the S-1™ switch on tone 1 knob activates the hot voicing in both humbucking and split modes. In addition, a treble bleed circuit maintains your highs at any volume.

Powered by an alnico 2 bar magnet, the passive Quadra Tap™ Humbucker is a tone-shaping powerhouse. Experience four distinct voices that span from vintage-inspired warmth to scorching hot output in both single coil and humbucker settings.

Features:

  • Quadra Tap™ 1 Humbucker in the bridge position and 70th Anniversary Ultra Noiseless™ Strat® pickups in the neck and middle positions
  • S-1™ switch on volume knob splits the Quadra Tap™ humbucker into a powerful single-coil
  • S-1™ switch on tone 1 knob activates the hot voicing in both humbucking and split modes
  • All passive designs that are noise-free
  • The fastest way to upgrade your Strat® with our time-tested electronics and craftsmanship

Specifications:

  • Pickguard: 3-Ply Parchment, 11-Hole Modern
  • Bridge Pickup: Quadra Tap™ 1 Humbucker
  • Middle Pickup: 70th Anniversary Ultra Noiseless™ Strat®
  • Neck Pickup: 70th Anniversary Ultra Noiseless™ Strat®
  • Lead Wire: Vinyl-covered
  • Magnet Type: Alnico 2
  • Magnet Wire: Enamel-coated
  • Shielded: Yes
  • Bobbin Material: Plastic
  • Controls: Master Volume (with S-1™ Switch), Tone 1. (with S-1™ Switch, Neck/Middle Pickups), Tone 2. (Bridge Pickup)
  • Switching: 5-Position Blade - Position 1. Bridge Pickup, Position 2. Bridge and Middle Pickup, Position 3. Middle Pickup, Position 4. Middle and Neck Pickup, Position 5. Neck Pickup
  • Output: Vintage and Hot
  • Power: Passive
  • Potentiometers: S-1™ 500K Master Volume, S-1™ 250K Tone 1, 500K Tone 2